- Taizhou Huangyan Yuanda Machinery Manufacture Co.,ltd.
YD-3000 One Blower And One Heater
YD-3000 One Blower And One Heater
PET bottle blow molding machine is used to blow bottles from PET perform which can be bought directly from the market.
Compare with water bottle blowing machine, the juice bottle blowing machine will need extra set of mould heater. And the preform will choose heavier one than water.
There are two types of semi-automatic PET bottle blow molding machine:
Type A: 1+1 means one set of perform heater plus one set of bottle blowing machine; this will need one person to operate the machine
Type B: 1+2 means one set of perform heater plus two sets of bottle blowing machine; this will need two person to operate the machine
General Information | YD-3000 One Blower And One Heater | YD-3000 Two Blower And One Heater |
Clamping Force | 12T | |
Clamping Stoke | 220mm | |
Max.Stretching Stroke | 360mm | |
Number of Cavities | 2 Cavity | 2 Cavity 2Pcs |
Theoretical Output | 0.5-3.0L:500-800 BPH | 0.5-3.0L:900-1500 BPH |
Max.Mould Thickness | 250mm | |
Mould plate size | 490x410mm | |
Voltage Standard | 380v/3PH/50Hz or special order | |
Total Power(Full Loaded) | 3-10KW | 5-15KW |
Min air compressor | 1.0m3/min 3.0Mpa | 1.6m3/min 3.0Mpa |
Net dimension & Weight(LxWxH) | ||
| Blow Molding Machine | 160x60x175cm | 160x60x175cm 2Pcs |
| Pre-heater | 180x70x140cm | |
Net Weight | 1.2T | 1.8T |
Container | ||
Container Volume | 0.5-3.0L | |
| Neck Diameter Range | 16-60mm | |
| Container Diameter | 140mm | |
| Container Height | 380mm | |
